Tilers Trade Outlet stocks the Aquamix range of sealers, Cleaners, Problem Solvers, Grout Colorant and Stone Restoration products. Stake your reputation on the quality these products bring to your job.
Sealer & Coating Remover
- Effectively removes sealers, coatings and finishes
- Long dwell time ideal for tough projects
- Cleans deep-set stains, epoxy grout haze, adhesives and paint
- Uses: Natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers
Non Cement Grout Haze Remover
- Removes single component, urethane and light epoxy grout haze
- Non-acidic formula
- Suitable Tile Types: Natural stone (such as granite, limestone, slate and travertine)
- ceramic, porcelain, quarry, Saltillo.
Cement Grout & Haze Remover
- Removes cured grout haze and mortar smears
- Cleans hard water stains and rust
- Dissolves efflorescence
- Contains no phosphates
- Easy-to-use acidic treatment
- Uses: Acid resistant natural stone (such as granite and slate), ceramic,porcelain, quarry, Saltillo, terra-cotta, and other acid-resistant tile
Concentrated Stone & Tile Cleaner
A super-concentrated cleaner formulated for everyday use. This neutral cleaner, when used regularly, prevents soap scum buildup and hard water deposits. The concentrated formula makes up to 484 Lt. Leaves a room smelling clean and fresh.
- Biodegradable formula
- Ideal for everyday use
Neutral pH formula
Heavy Duty Tile & Grout Cleaner
A concentrated, highalkaline
cleaner and degreaser. Aqua Mix®
Heavy-Duty Tile & Grout Cleaner effectively removes grease, soap
scum, other organic materials
and floor finishes.
- For heavily soiled and neglected areas
- Cleans ground-in dirt, grease, soap scum, and other organic materials
- Strips wax and floor finishes
Pro Block Pre Sealer
An economical water based penetrating sealer designed to resist staining caused by water soluble minerals which can be absorbed through the back and sides of porous stone or tile during installation or grouting.
- Use on all porous natural stone, such as granite, marble, limestone, travertine, slate, sandstone etc. concrete pavers, brick and masonry.
A premium, no-sheen, enhanced-look, 100% polymer-solid,
penetrating sealer formulated to darken, enrich, and highlight the
character and beauty of unsealed natural stone.
- Darkens, enriches and highlights
- Maximum stain protection – no sheen
- State-of-the-art polycure technology
An economical, no-sheen, natural look, water-based, penetrating
sealer designed to resist stains. May also be used as a pre-grouting
sealer. Allows moisture vapor transmission. Can be used as a grout sealer.
- Excellent stain protection
- No sheen, natural look
- Safe, water-based formula
Sealers Choice - Gold
A premium, no-sheen, natural look, water-based, penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Allows moisture vapor transmission. Rapid Cure Formula protects in less than 4 hours.
- Premium sealer for stone, tile and grout
- For interior and exterior use
Aquashield Cleaner & Resealer
A ready-to-use cleaner and resealer.
- Non-acidic formula
- Adds sealer with every cleaning
- Formulated for everyday use
- Suitable Tile Types
- Sealed stone
- Quarry tile
AquaMix® Grout Sealer is a waterbased
sealer that resists water and
oil based contaminants. It works with cement-based sanded and
unsanded grouts installed between natural stone, unglazed bisque and
porcelain tile, clay pavers, concrete and brick. Key Features
- Repels food, dirt and grease
- Inhibits mildew and bacteria
- Simplifies maintenance
Stone Clean & Shine
A spray-and-buff cleaner that is designed to enhance the natural
beauty of the stone as it cleans.
- Ideal for everyday use
- Beautifies as it cleans
- Helps protect factory finish
- Suitable Tile Types:Sealed, polished natural stone (such as granite, limestone, marble,slate, and travertine), countertops, and non-traffic surfaces.
An easy-to-use, professional grade waterborne epoxy that recolors,
seals and rejuvenates dirty or discolored existing grout joints. Use with a variety of grout types, including cement, epoxy, urethane and Single Component® grouts. Also simplifies ongoing grout cleaning by helping to guard against stains by sealing and protecting recolored grout. Includes Microban® antimicrobial protection that prevents the growth of stain-causing mold and mildew on cured colorant.
Poultice Stain Remover
A dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains. It is also a fine
abrasive cleaning powder that removes stubborn surface stains and light grout haze.
- Effectively removes deep-set oil and grease stains
- Safe, nonacidic, abrasive cleaning powder
- Excellent cleaning additive
Manufacturers may change their products from time to time.
Users of our site should check the manufacturer’s website for any updates to the fact sheet available here.